Use the automatic scaling of the y-axis based on ymax = tan(1.57), which is well over 1000: If XLimMode, YLimMode, or ZLimMode is manual, mode is manual. Mode is auto if XLimMode, YLimMode, and ZLimMode are all set to auto. Returns three strings indicating the current setting of Axes properties: Turns on all axis lines, tick marks, and labels. Turns off all axis lines, tick marks, and labels. axis normalĪutomatically adjusts the aspect ratio of the Axes and the aspect ratio of the data units represented on the Axes to fill the plot box. axis vis3dįreezes aspect ratio properties to enable rotation of 3-D objects and overrides stretch-to-fill. MATLAB adjusts the x-axis, y-axis, and z-axis so that they have equal lengths and adjusts the increments between data units accordingly. Makes the current Axes region square (or cubed when three-dimensional). Is the same as axis equal except that the plot box fits tightly around the data. The aspect ratio of the x-, y-, and z-axis is adjusted automatically according to the range of data units in the x, y, and z directions. Sets the aspect ratio so that the data units are the same in every direction. The y-axis is vertical with values increasing from bottom to top. The x-axis is horizontal with values increasing from left to right. axis xyĭraws the graph in the default Cartesian axes format with the coordinate system origin in the lower-left corner. The j-axis is horizontal with values increasing from left to right. The i-axis is vertical, with values increasing from top to bottom. Places the coordinate system origin in the upper-left corner. Sets the axis limits to the range of the data. This differs from axis equal because the plot box aspect ratio automatically adjusts. This sets the XLimMode, YLimMode, and ZLimMode properties to manual. axis manual and axis(axis)įreezes the scaling at the current limits, so that if hold is on, subsequent plots use the same limits. For example, axis 'auto x' computes only the x-axis limits automatically axis 'auto yz' computes the y- and z-axis limits automatically.

You can restrict this automatic behavior to a specific axis. Sets MATLAB to its default behavior of computing the current Axes' limits automatically, based on the minimum and maximum values of x, y, and z data. The returned values are the current Axes' XLim, Ylim, and ZLim properties. v has four or six components depending on whether the current Axes is 2-D or 3-D, respectively. Returns a row vector containing scaling factors for the x-, y-, and z-axis. Sets the limits for the x-, y-, and z-axis of the current Axes. Sets the limits for the x- and y-axis of the current Axes. = axis('state')ĭescription axis manipulates commonly used Axes properties. Axis (MATLAB Function Reference) MATLAB Function Reference

Get current ylim matlab